Command Line Options Examples
| Command | Shot | Data |
|---|---|---|
| perl prlplot.pl -xlabel=Noise -ylabel=BER -title=QPSK_Bit_Error_Rate -yfmt=2 -yfxp -ylog -xfxp -ygrid -xgrid -marker=4 qpsk.dat | BER Theme 1 | qpsk.dat |
| perl prlplot.pl -xlabel=Noise -ylabel=BER -title=QPSK_Bit_Error_Rate -yfmt=2 -yfxp -ylog -xfxp -ygrid -xgrid -theme=2 -marker=4 qpsk.dat | BER Theme 2 | qpsk.dat |
| perl prlplot.pl -xlabel=Time -ylabel=Amplitude -title=Eye Diagram -yfmt=2 -yfxp -eye eye.dat | Eye Diagram Nyquist Pulse Shaping | eye.dat |
| perl prlplot.pl -xlabel=Time -ylabel=Amplitude -title=Eye Diagram -yfmt=2 -yfxp eye.dat | Eye Diagram Original | eye.dat |
| perl prlplot.pl -yfxp -yfmt=3 -xfxp -xfmt=1 -xgrid -ygrid -mc -theme=2 -legx=70 -legy=120 -xoffb=100 -yoffl=100 -title=Freq_Domain_Spice -xlabel=Frequency -ylabel=Magnitude mcfreq.dat | Multiplot Freq Response | mcfreq.dat |
| perl prlplot.pl -yfxp -yfmt=3 -xfxp -xfmt=3 -xgrid -ygrid -mc -theme=s -marker=2 -legx=70 -legy=120 -xoffb=100 -yoffl=100 -title=Time_Domain_Spice -xlabel=Time -ylabel=Amplitude mctime.dat | Multiplot Time Domain | mctime.dat |
| perl prlplot.pl -yfxp -xfxp -theme=2 -polarmin=-10 -polarmax=30 -width=500 -height=500 -title=Polar_Plot_DB -polardb polardbtest.dat | Polar Plot DB | polardbtest.dat |
| perl prlplot.pl -yfxp -xfxp -theme=2 -polarmin=-10 -polarmax=30 -width=500 -height=500 -title=Polar_Plot -polar polartest.dat | Polar Plot | polartest.dat |
| perl prlplot.pl -xlabel=Real -ylabel=Imag -pz lowpass.pz | Pole Zero Lowpass Filter | lowpass.pz |
| perl prlplot.pl -yfxp -xfxp -xlabel=Real -ylabel=Imag -title=Scatter_Plot -scatter scatter.dat | Scatter Plot | scatter.dat |
| perl prlplot.pl -yfxp -xfxp -xlabel=Real -ylabel=Imag -title=Scatter_Plot -theme=2 -scatter scatter.dat | Scatter Plot Theme2 | scatter.dat |
| perl prlplot.pl -yfxp -xfxp -xlabel=samples -ylabel=amplitude -title=Sine_Wave_Bars -bars sine2.dat | Sine Wave Bars | sine2.dat |
